Be prepared to pass your plumber licensing exam in less than two weeks
.
Regularly $147.00
NOW ONLY $49.95
Download this course now and start studying today
“Guide to Passing the Plumbing Exam”

TRY BEFORE YOU BUY!
"Guide to Passing the Plumbing Exam"
Completely up-to-date thru 2022
Includes Business Exam Prep Course
Based on NASCLA’s “Contractors Guide to Business, Law and Project Management”


Developed by
Energy Marketing Service
Since 1986
The only plumber’s license exam prep course covering all areas of the exam:
● Plumbing Code Course
● Fuel Gas Code Course
● Business and Law Course
● Plumber’s Math
● And it’s guaranteed
Whether your exam is administered by PSI, Prometrics, Experior, ICC, PROV, your state or any other testing agency. This course will get you a passing grade.
Can’t seem to get started?
Let us guide you through.
WHAT YOU WILL LEARN WITH OUR GUIDE
✅ CALCULATING FIXTURE REQUIREMENTS
✅ WATER DISTRIBUTION SIZING AND DESIGN (using friction charts)
✅ ISOMETRICS AND PLUMBING SYMBOLS
✅ PROPERTIES OF WATER
✅ SANITARY DRAIN SIZING
✅ VENT SIZING
✅ STORM DRAINAGE SIZING
✅ SEPTIC TANK AND DRAIN FIELD SIZING
✅ CALCULATING COMBUSTION AIR REQUIREMENTS
✅ GAS PIPE SIZING
✅ GAS APPLIANCE VENTING
✅ BUSINESS ACCOUNTING
✅ BUSINESS MATH CALCULATIONS
✅ DEFINITIONS WITH ILLUSTRATIONS
✅ PLUS- Get a 150 question practice exam with references and explanations
Most states have adopted the International Codes, although they may bare the name of a state, such as New York State Mechanical Code or North Carolina Mechanical Code.
The teal colored states on the map below have adopted the International Plumbing Code. If you are seeking a license in any of these states, then this course is for you


“I guarantee you will pass your exam or I will give you an immediate refund”. Not tomorrow or in 30 days, but immediately
John White
About your instructor
John White has been teaching plumbing and mechanical for over 40 years. He has a BSBA degree in Business Administration, holds an electrical, plumbing and HVAC licenses. He has taught at both, universities and community colleges, has presented seminars throughout the nation and has even created licensing exams like the one you are about to take. John sold his mechanical contracting business in 2006 to devote his energy to his consulting company, Energy Marketing Services, which develops and conducts plumbing and HVAC exam prep courses and is also an approved provider of continuing education.
Test your Plumbing knowledge
Below Is a sample of what questions you may encounter on the exam. Our course will prepare you to answer them confidently
1. Calculate the pressure loss of 376 feet of 1″ water pipe @ 5 feet per second
2. What is the weight of water in a 60′ x 4″ diameter pipe?
3. When installing a naturally vented 40,000 BTUH gas water heater, with an 9 foot high B vent with 5 foot lateral, What is the minimum vent diameter?
4. If you purchase a fixture for $1000 and wish to make 30% profit; what would your selling price be? Hint: the answer is not $1300
5. Size each drain/vent in this isometric

Scroll to bottom for answers
Better than a classroom course...

Students who use my course have a higher passing rate than students who attend a classroom.
WHY?
Because, people who READ the material retain much more than people whom are TOLD the material, and the Guide is always next to them for reference or as a last minute refresher. In classroom courses, one of the most common statements made during breaks is “I think I’ll understand this stuff better once I get home and look over my notes” (Translated; “ I don’t have any idea what he’s talking about, and I’ve only got 1/2 page of notes.”).
If your looking for a source to help you understand the provisions of the International Plumbing and Gas codes, look no further. This Guide takes you through each chapter, step-by-step. It leaves no stone unturned. It explains water, drain and vent pipe sizing, how to calculate fixture requirements, occupancy loads, male/female ratios, gas pipe and vent sizing, and combustion air requirements.
“If you don’t do it now, What will you be doing five years from now?”

Below is an excerpt from our study guide (Sizing water pipes)

Having trouble with symbols or isometrics?
We’ve got you covered!


GET THREE VALUABLE COURSES NEEDED TO PASS THE PLUMBING EXAM
✅ Plumbing Code Course ✅ Fuel Gas Code Course ✅ Business Course
PLUS a 150 question practice exam, that covers the entire gamut; with answers and how we got them
“YOU WILL LEARN MORE FROM THIS GUIDE THAN FROM ANY FORMAL CLASSROOM COURSE, GUARANTEED”
What our customers have to say


PURCHASE INSTANT DOWNLOAD
“Guide to Passing the Plumbers Exam”
ONLY $49.95
If you wish to print the course, it is about 120 pages. Your debit or credit card purchase will be safely processed through *Clickbank.
*”ClickBank is the retailer of products on this site. CLICKBANK® is a registered trademark of Click Sales, Inc., a Delaware corporation located at 1444 S. Entertainment Ave., Suite 410 Boise, ID 83709, USA and used by permission. ClickBank’s role as retailer does not constitute an endorsement, approval or review of these products or any claim, statement or opinion used in promotion of these products.”
Answers to plumbing questions
1. 18 psi pressure drop
2. 327 pounds
3. 4 inch
4. $1428.57
5.
A 1-
B 2”
C 1-
D 2”
E 3”
F 3”
G 3”
Have questions?
CONTACT US anytime by email
jrwmtw@gmail.com
252-943-1028 (M- F, 9am – 6pm Eastern)jrwmtw@gmail.com
Energy Marketing Service
Since 1986